Influence of polymerization cycle in properties of acrylic resin polymerized by microwave energy
DOI:
https://doi.org/10.15448/1980-6523.2016.3.21693Keywords:
Acrylic resins, Microwaves, Hardness test, SolubilityAbstract
Objective: The purpose of this study was to evaluate the physicochemical properties of acrylic resin polymerized by microwave energy in short cycle of polymerization.
Methods: Two brands (Classico and VIPI) and two cycles were evaluated (manufacturer cycle and short cycle). The characteristics and properties as degree of conversion, glass transition temperature, impact strength-Izod, Knoop hardness, swelling degree, soluble fraction, specific mass, water sorption and solubility were evaluated.
Results: Glass transition temperature, hardness, specific mass, soluble fraction and solubility were statistically significant between cycles and brands (p<0.05). Water sorption showed no difference between cycles (p>0.05) and impact strength presented difference between brands in short cycle (p<0.05). Acrylic resin polymerized by microwave energy with manufacturer cycle presented no difference in physicochemical properties between evaluated brands. Conclusion: The short cycle of polymerization showed reduced properties in microwave acrylic resin when compared to manufacturer cycle. Manufacturer cycle of polymerization should be used to acrylic resin devices production.
References
Niishi MJ. Studies on the curing of denture base resins with microwave irradiation with particular reference to heat-curing resins. Osaka Dent 1968; 2:23-40.
Nevalainen MJ, Närhi TO, Ainamo A. Oral mucosa lesions and oral hygiene habits in the home-living elderly. J Oral Rehab 1997; 24:332-7. https://doi. org/10.1046/j.1365-2842.1997.d01-298.x
Silva CHL, Paranhos HFO, Ito IY. Evidenciadores de biofilme em prótese total: avaliação clínica e antimicrobiana. Pesqui Odontol Bras 2002; 16:270-5. https://doi.org/10.1590/S1517-74912002000300015
Barbachan JJD, Rados PV, Sant’Ana Filho M, Domingues MG. Estudo clínico da estomatite protética: avaliação preliminar. Rev Fac Odontol Porto Alegre 1995; 36:27-31.
Ilbay SG, Guvener S, Alkumru HN. Processing dentures using a microwave technique. J Oral Rehabil 1994; 21:103-9. https://doi. org/10.1111/j.1365-2842.1994.tb01129.x
Reitz PV, Sanders JL, Levin B. The curing of denture acrylic resins by microwave energy. Physical properties. Quintessence Int 1985; 16: 547-51.
Shlosberg SR, Goodacre CJ, Munoz CA, Moore BK, Schnell RJ. Microwave energy polymerization of poly(methyl methacrylate) denture base resin. Int J Prosthodont 1989; 2:453-8.
Tsuchiya H, Hoshino Y, Tajima K, Takagi N. Leaching and cytotoxicity of formaldehyde and methyl methacrylate from acrylic resin denture base materials. J Prosthet Dent 1994; 71:618-24. https://doi.org/10.1016/0022-3913(94)90448-0
Barbosa DS, Pero AC, Marra J, Compagnoni MA. Flexural polymerized by different strength of acrylic resins cycles. J Appl Oral Sci 2007; 15:424-8.
https://doi.org/10.1590/S1678-77572007000500010
Compagnoni MA, Barbosa DB, de Souza RF, Pero AC. The effect of polymerization cycles on porosity of microwave-processed denture base resin. J Prosthet Dent 2004; 91:281-5. https://doi.org/10.1016/j. prosdent.2004.01.006
ISO 1567:1999 Dentistry- Denture Base Polymers. Switzerland; 1999.
Shin, W. S., Li, X. F., Schwartz, B., Wunder, S L., & Baran, G. R. Determination of the degree of cure of dental resins using Raman and FT-Raman spectroscopy. Dental Materials 1993; 9:317-24. https://doi. org/10.1016/0109-5641(93)90050-Z
ASTM-International. American society for testing and materials. D 256 Izod Impact. United States of America. 1998.
ASTM-International. American society for testing and materials. IN 153 Density. United States of America. 1998.
Keller JC, Lautenschlager EP. Porosity reduction and its associated effect on the diametral tensile strength of activated acrylic resins. J Prosthet Dent 1985; 53:374-9. https://doi.org/10.1016/0022-3913(85)90516-5
Anseth KS, Bowman NC. Kinetic gelation model predictions of crosslinked polymer network microstructure. Chem Eng Sci 1994; 49:2207-17. https://doi.org/10.1016/0009-2509(94)E0055-U
Tamareselvy K, Rueggeberg FA. Dynamic mechanical analysis of two crosslinked copolymer systems. Dent Mater 1994; 10:290-7. https://doi.
org/10.1016/0109-5641(94)90036-1
Downloads
Published
Issue
Section
License
COPYRIGHT
The submission of originals to Odonto Ciência implies the transfer by the authors of the right for publication. Authors retain copyright and grant the journal right of first publication. If the authors wish to include the same data into another publication, they must cite Odonto Ciência as the site of original publication.
CREATIVE COMMONS LICENSE
As this journal is open access, the articles are allowed free use in scientific and educational applications, with citation of the source.
According to the type of Creative Commons License (CC-BY 4.0) adopted by Odonto Ciência, the user must respect the requirements below.
You are free to:
Share — copy and redistribute the material in any medium or format.
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
However, only under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests Odonto Ciência endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
For more details on the Creative Commons license, please follow the link in the footer of this website.
