Laminate veneers: mimetizing nature through anatomical remodeling – case report

Dayla Thyeme Higashi, Márcio Grama Hoeppner, Raquel Sano Suga Terada, Mariana Paizana Iris, Renato Batista Cogo

Abstract


OBJECTIVE: Dental aesthetics is one of the areas of dentistry that has most advanced in terms of procedures, techniques and materials. Changes in color, shape, and texture are commonly cited as grounds for complaint, which are sometimes characterized by details, making the work challenging. The objective of this work is to report the planning and execution of a clinical case of smile harmonization with ceramic laminates for remodeling smile.
CASE DESCRITION: A male patient consulted a specialist to refine the appearance of his smile that already had a satisfactory pattern of color and texture. The planning was started using digital smile planning, followed by diagnostic waxing of the elements involved. The planning approval took place through the Mock up. The dental grinding performed was minimal and followed a silicone wear guide. The pieces were made in lithium disilicate and installed under absolute isolation according to the cementing protocol of the material. The finishing and polishing completed the installation of the pieces, removing excesses and guaranteeing periodontal compatibility.
CONCLUSION: We conclude that indirect aesthetic treatments currently have a minimally invasive character and are highly accepted due to their ability to remodel the smile with perfection and naturalness.


Keywords


dental restoration; esthetics; diastema.

Full Text:

PDF

References


Pimentel W, Teixeira ML, Costa PP et al. Predictable Outcomes with Porcelain Laminate Veneers: A Clinical Report. J Prosthodont 2016;25: 335-40.

https://doi.org/10.1111/jopr.12413

McLaren EA, Garber DA, Figueira J. The Photoshop Smile Design technique (part 1): digital dental photography. Compend Contin Educ Dent 2013;34:772, 4, 6 passim.

Alrizqi AM, Mohammed YH; Albounni, R. Smile Design: Assessment and Concept. Int J of Cur Res 2015;7:24746-50.

https/doi/10.1111/j.1708-8240.2011.00428.x

Da Cunha LF, Pedroche LO, Gonzaga CC, Furuse AY. Ultimate ceramic veneer: a laboratory-guided preparation technique for minimally invasive laminate veneers. thickness porcelain laminate veneers. J Prosthet Dent 2014;112:1315-8.

https://doi.org/10.1016/j.prosdent.2014.05.028

Sriram G, Nagalakshmi S, Balachandar K, Madhusudan K. Interdisciplinary approach for improved esthetic results. J Pharm Bioallied Sci 2014;6: 192-5.

https://doi.org/10.4103/0975-7406.137466

Zanardi PR, Laia Rocha Zanardi R, Chaib Stegun R, Sesma N, Costa BN, Cruz Laganá D. The Use of the Digital Smile Design Concept as an Auxiliary Tool in Aesthetic Rehabilitation: A Case Report. Open Dent J 2016;10:28-34.

https://doi.org/10.2174/1874210601610010028

Zavanelli AZRA, Mazaro JVQ, Santos D, Fálcon-Antenucci RM. Tratamento cosmético com lentes de contato e laminados cerâmicos. Archives of Health Investigation 2015;4:10-7.

Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. Journal of dentistry 2000;28:163-77.

https://doi.org/10.1016/S0300-5712(99)00066-4

Piemjai M, Arksornnukit M. Compressive fracture resistance of porcelain laminates bonded to enamel or dentin with four adhesive systems. J Prosthod 2007;16:457-64.

https://doi.org/10.1111/j.1532-849X.2007.00227.x

Layton DM, Clarke M, Walton TR. A systematic review and meta-analysis of the survival of feldspathic porcelain veneers over 5 and 10 years. Int J Prosthodont 2012;25:590-603.

Gurel G, Sesma N, Calamita MA, Coachman C, Morimoto S. Influence of enamel preservation on failure rates of porcelain laminate veneers. Int J Periodontics Restorative Dent 2013;33:31-9.

https://doi.org/10.11607/prd.1488

Okuda W. Smile Design 1.0: Learning from our past to meet the current challenge for predictable success. Gen Dent 2015;63:16-8.

Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995;8:239-46.

Walter RD, Raigrodski AJ. Critical appraisal: Clinical considerations for restoring mandibular incisors with porcelain laminate veneers. J Esthet Restor Dent 2008;20:276-81.

https://doi.org/10.1111/j.1708-8240.2008.00192.x

Abu-Hussein MW, Watted N, Abdulgani A. Porcelain Laminates - Current State of The Art: A Clinical Review. Int J Dental and Health Sci 2015;2: 323-33.

Coachman CC, Calamita M. Digital Smile Design: a tool for treatment planning and communication in esthetic dentistry. Quintessence Dent Technol 2012;35:103-11.

Lin WS, Zandinejad A, Metz MJ, Harris BT, Morton D. Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle. Oper Dent 2015;40:357-63.

https://doi.org/10.2341/13-295-S

De Andrade OS, Hirata R, Celestrino M, Siqueira S, Nahas R. Ultimate ceramic veneer: a laboratory-guided preparation technique for minimally invasive laminate veneers. J Calif Dent Assoc 2012;40:489-94.




DOI: http://dx.doi.org/10.15448/1980-6523.2018.1.28767

e-ISSN: 1980-6523

ISSN-L: 0102-9460

 

This journal is a member of, and subscribes to the principles of, the Committee on Publication Ethics (COPE) http://www.publicationethics.org


SJR (SCImago Journal & Country Rank) IMPACT FACTOR:

SCImago Journal & Country Rank

Licença Creative Commons

Except where otherwise noted, content of this journal is licensed under a Creative Commons Attribution 4.0 International license.

 

Editorial Policies of Brazilian Scientific Journals. Deposit availability: Blue .

 

Copyright: © 2006-2019 EDIPUCRS