Surface roughness influences Candida albicans biofilm formation on denture materials

Authors

  • Wander José da Silva Piracicaba Dental School, State University of Campinas
  • Letícia Machado Gonçalves Piracicaba Dental School, State University of Campinas
  • Flávia Carvalho Viu Piracicaba Dental School, State University of Campinas
  • Cristiane Maria Brasil Leal Piracicaba Dental School, State University of Campinas
  • Célia Marisa Rizatti Barbosa Piracicaba Dental School, State University of Campinas
  • Altair Antoninha Del Bel Cury Piracicaba Dental School, State University of Campinas

DOI:

https://doi.org/10.15448/1980-6523.2016.2.15324

Keywords:

Acrylic resins, Biofilms, Candida albicans

Abstract

Objective: This study aimed to evaluate the influences of surface roughness (SR) of denture base and liner materials on Candida albicans biofilm formation.
Methods: Discs were fabricated using poly (methyl methacrylate) acrylic resin and poly(ethyl methacrylate) denture liner, according to manufacturers’ instructions. Both acrylic resin and relined discs were finished or finished + polished and the SR was measured. Discs were saliva-coated, 
and C. albicans biofilms were developed on such surfaces for 48 hours. Biofilms were evaluated for cell counts, metabolic activity, and structural characteristics. Data were analyzed by one-way ANOVA and Tukey tests using a significance level of 5%.
Results: Finished acrylic resin and denture liner discs had higher SR compared to finished + polished discs (P<0.001). Finished + polished acrylic resin discs contained fewer cells compared to only finished discs (P<0.001). No metabolic activity differences were seen between biofilms formed on both groups (P>0.05). Bulky, thick and less rough biofilms were formed on only finished denture materials (P<0.05). Confocal images reveal increased presence of black spaces for biofilms developed on finished + polished discs. Conclusion: Reduced SR resulted in decreased C. albicans biofilm accumulation on both denture materials.

References

Emami E, Taraf H, de Grandmont P, Gauthier G, de Koninck L, Lamarche C, de Souza RF. The association of denture stomatitis and partial removable dental prostheses: a systematic review. Int J Prosthodont 2012;25: 113-9.

Nevzatoglu EU, Ozcan M, Kulak-Ozkan Y, Kadir T. Adherence of Candida albicans to denture base acrylics and silicone-based resilient liner materials with different surface finishes. Clin Oral Investig 2007;11: 231-6. https://doi.org/10.1007/s00784-007-0106-3

Pereira-Cenci T, Cury AA, Cenci MS, Rodrigues-Garcia RC. In vitro Candida colonization on acrylic resins and denture liners: influence of surface free energy, roughness, saliva, and adhering bacteria. Int J Prosthodont 2007; 20:308-10.

Kang SH, Lee HJ, Hong SH, Kim KH, Kwon TY. Influence of surface characteristics on the adhesion of Candida albicans to various denture lining materials. Acta Odontol Scand 2012. https://doi.org/10.3109/ 00016357.2012.671360

Goncalves LM, Del Bel Cury AA, Sartoratto A, Garcia Rehder VL, Silva WJ. Effects of undecylenic acid released from denture liner on Candida biofilms. J Dent Res 2012;91:985-9. https://doi.org/10.1177/0022034512458689

Quirynen M, Marechal M, Busscher HJ, Weerkamp AH, Darius PL, van Steenberghe D. The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man. J Clin Periodontol 1990;17:138-44. https://doi.org/10.1111/j.1600-051X.1990. tb01077.x

Radford DR, Challacombe SJ, Walter JD. Denture plaque and adherence of Candida albicans to denture-base materials in vivo and in vitro. Crit Rev Oral Biol Med 1999;10:99-116. https://doi.org/10.1177/1045441199 0100010501

Hahnel S, Henrich A, Rosentritt M, Handel G, Burgers R. Influence of artificial ageing on surface properties and Streptococcus mutans adhesion to dental composite materials. J Mater Sci Mater Med 2010;21:823-33. https://doi.org/10.1007/s10856-009-3894-y

Tari BF, Nalbant D, Dogruman Al F, Kustimur S. Surface roughness and adherence of Candida albicans on soft lining materials as influenced by accelerated aging. J Contemp Dent Pract 2007;8:18-25.

Radford DR, Sweet SP, Challacombe SJ, Walter JD. Adherence of Candida albicans to denture-base materials with different surface finishes. J Dent 1998;26:577-83. https://doi.org/10.1016/S0300-5712(97)00034-1

da Silva WJ, Seneviratne J, Samaranayake LP, Del Bel Cury AA. Bioactivity and architecture of Candida albicans biofilms developed on poly(methyl methacrylate) resin surface. J Biomed Mater Res B Appl Biomater 2010; 94:149-56. https://doi.org/10.1002/jbm.b.31635

Teughels W, Van Assche N, Sliepen I, Quirynen M. Effect of material characteristics and/or surface topography on biofilm development. Clin Oral Implants Res 2006;17 Suppl 2:68-81. https://doi.org/10.1111/j.1600- 0501.2006.01353.x

Nikawa H, Nishimura H, Makihira S, Hamada T, Sadamori S, Samaranayake LP. Effect of serum concentration on Candida biofilm formation on acrylic surfaces. Mycoses 2000;43:139-43. https://doi.org/10.1046/j.1439- 0507.2000.00564.x

Minagi S, Miyake Y, Inagaki K, Tsuru H, Suginaka H. Hydrophobic interaction in Candida albicans and Candida tropicalis adherence to various denture base resin materials. Infect Immun 1985;47:11-4.

da Silva WJ, Seneviratne J, Parahitiyawa N, Rosa EA, Samaranayake LP, Del Bel Cury AA. Improvement of XTT assay performance for studies involving Candida albicans biofilms. Braz Dent J 2008;19:364-9. https://doi.org/10.1590/S0103-64402008000400014

Heydorn A, Nielsen AT, Hentzer M, Sternberg C, Givskov M, Ersboll BK, Molin S. Quantification of biofilm structures by the novel computer program COMSTAT. Microbiology 2000;146(Pt 10):2395-407. https://doi. org/10.1099/00221287-146-10-2395

Vieira AP, Senna PM, Silva WJ, Del Bel Cury AA. Long-term efficacy of denture cleansers in preventing Candida spp. biofilm recolonization on liner surface. Braz Oral Res 2010;24:342-8. https://doi.org/10.1590/S1806- 83242010000300014

Downloads

Published

2016-12-26

Issue

Section

Original Article